Why You Should Hire a Glazier to Repair Double Glazing Seals

If window seals fail, it can lead to more energy bills and foggy windows. Engaging a professional for repair of the damaged seals can prevent the issue from getting worse.

The window seals are vital to the insulation offered by double glazing. They're easy-to-repair and can save you money in the end.

Remove the Old Seal

The seals may break due to various reasons. They may be damaged because of inadequate installation or break due to normal wear and wear and tear. While it is impossible to stop a window doctor from breaking but you can take a few steps to lessen the possibility of this happening. Avoiding the power washing of your windows for instance, can lower the chance of damage caused by high pressure water. It is also important to ensure that the window manufacturer does not recommend the use of reflective window films on their windows as these can damage the window seal.

The most typical sign of a broken seal in double-glazed windows is the presence of condensation between the two panes. This happens when the gas sealed in a vacuum like argon and Krypton, which was in between the two panes of glass has escaped. When this happens, the window is not able to keep moisture and cold air out of the house.

It is good to know that repairing a broken window seal is quite simple. You can buy a new wedge gasket seal from any hardware store and it should be able to be installed on your uPVC windows. If you are concerned that you might not be able install the new seal correctly you can spray water on the outside of the window frame to help lubricate the process.

It is essential to examine the grooves of the window frame prior to installing the new seal. This could include melted pieces of uPVC that are left behind from previous repair attempts. You can chip away these areas with a chisel before starting to make sure that the new seal will be a good fit in the window frame.

While it is possible to repair damaged uPVC window seal on your own, it's often better to leave the job to experts. A professional glazier has the tools and expertise to finish the job quickly and with minimum risk to your uPVC window.

Clean the Surface

Double glazing windows can help reduce noise pollution when they are installed and maintained in a proper manner. A broken window seal can let moisture and air be able to enter, which could cause many problems such as condensation. Moisture inside a glass pane can be unattractive but it also causes mould to develop and cause damage to the frame. Professional repair is needed. Other indicators of a faulty sealing include a draft that may be uncomfortable and expensive to heat, or glass distortion that can alter light transmission and impact on the view.

The good aspect is that double-glazing windows are fairly simple to fix, especially when the problem is discovered early. Although it is possible to do the work yourself, a professional is generally recommended since they have the experience and access to high-quality materials that can give long-lasting results.

To begin, you will have to take off any silicone sealant that is already in place. This can be accomplished with a sharp knife. After removing any sealant that was previously used, the surface must be thoroughly cleaned. After cleaning the surface, the next step would be to reseal the windows.

Before re-sealing, take the bottom pane and flip it upside down so that the surface of the glass that was originally on the inside of the sealed unit is facing upwards. Make sure to thoroughly clean the surface using a dry cloth and dry it to ensure that no water marks remain.

Drilling holes into windows with double glazing is usually not a good idea but when it comes to saving money and avoiding the need for a call from a professional out, a small hole in the seal can be used to insert the desiccate container that will take in any moisture that might have accumulated between the two glass panes. The hole could then be cleaned with ruby alcohol (isopropyl) to stop the build-up of mould.

Double-glazed windows are made to be long-lasting but they can and do break down and a lot of people are in need of a professional double glazing repair. Most commonly windows fail to seal when there is condensation between the glass panes, or if there are drafts.

Apply a New Seal

Window seals are crucial to ensure a secure and efficient glass-to-frame connection, regardless of whether you've just moved into your home or just installed double-glazed windows. As time passes, seals may be damaged due to weather conditions and other external factors. If the seals are damaged, it is important to take steps to reseal them as quickly as you can. This will prevent moisture from leaking between the glass panes which could cause condensation, energy loss, and even damage to your home.

It is best to pick a day with low rainfall while you're performing this task. You'll be working with a window open, so you don't want large amounts of rainwater to flow into your home, possibly causing damage to the new seals. In addition, if you have to employ power tools to take off the old window seals, be sure to wear eye protection since it's easy to get dust or other debris into your eyes.

After you've removed your old seal, it's important to clean the surface before applying a new seal. With a knife, or a putty knife, remove all residuals from the area and then apply a fresh layer of silicone caulking to reseal the gap. Make sure you apply a small amount of the product on the outside of the frame too as this will help to create an airtight and waterproof seal around your glass.

Paint the outside of the frames of your windows to shield them from the elements. This is a good way to protect the integrity of your window, particularly in hot weather.

Although you can reseal your windows yourself but if the issue is serious it's recommended that you get an expert window company to do the work on your behalf. This way, you can be assured that the new seals will be put in place properly to ensure that your windows remain secure and energy efficient.

Allow the seal to set

Double-glazed windows are a good choice for homeowners since it protects against the elements, holds the heat generated by your heating system within and stops sunlight from getting out. It can only do this when the window seal is correctly installed. A broken seal can cause mist and condensation to form between the glass panes. It can cause energy loss, draughts, and even security concerns. To ensure that your window isn't damaged and home, it is crucial to repair a damaged seal immediately.

You can test the seal on your window by smelling for draughts or cold around the frame's corners. If you can feel this the gasket of your window is flattened and no longer forming an airtight seal. Also, you can check for misting or condensation between the glass panes in your double-glazed windows. Both of these problems are caused by a leak in the double-glazed window seal. This allows moisture to get into that section, causing damage to its insulation properties.

If you are a keen DIYer, there are many DIY kits that can be used to reseal double glazing seals. These kits usually require drilling a small hole into the window and cleaning it using a magnet. They then put in drying pellets that disappear and then plug the hole with clear concrete. However, while these kits do have a good track record of providing quick results, they do tend to need doing more often than professionally-installed windows and they don't always provide a lasting solution.

Whether you have tried to repair your window seals yourself or have hired a professional company it is essential to allow the new seal to dry prior to making use of it. It can take between a few days to a few weeks for the sealant to fully cure, so it's best to wait until it is to open the window again. A window that has been sealed must be handled with care and Double glazing repair attention and it's a good idea to lay an old towel or duvet on the work surface to protect it from stains and scratches.