Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good shape.

For single pane windows, it is fairly easy to replace them, and the new window will generally fit within the frame that was previously installed easily. However, if you have double pane windows that are anchored by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this situation, you will need to locate some plastic spacers that aid the new pane in being able to fit perfectly into the frame of the window.

If you're planning to try to remove the glass panes yourself it is crucial to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any shards fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to prevent drafts and water from entering the home until a professional can come out and fix the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is large, you may be interested in the security door with an integrated window, Upvc Repairs Near Me since this will offer the best of both worlds.

2. Sagging

Upvc Repairs near me windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a variety of issues that include sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

Repositioning the hinges can aid in fixing a window which is sliding. To do this, you'll need to open the window so that you can access the frame. Then, upvc Repairs near me using the screwdriver, you'll be able to unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is typically caused by screws that have been removed over time, but it could be due to the mechanism of the handle wearing out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. The first step is to close your window and do a test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's crucial to take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also undermine your efforts to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

It is a fairly easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, the old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Make sure that the drainage holes are free of debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more extreme situations, you may have to replace the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass in your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with a breeze, it may be hinges at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to replace a hinge on a window, but it's simpler if you have someone to help you hold the frame.

Make sure that the uPVC hinges open and close in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window a certain way or due to inadequate installation at the factory. Sending us a photo through our website can often solve the issue. We are more than happy to give suggestions.

It is also essential to grease the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more easily. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to perform this every year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. Firstly the hinges, again because of wear and tear, could become misaligned. This will cause a gap to form where the sash meets the frame. If they are beyond repair, it may be necessary to have them realigned. The interlock, which is located on the hinge of the window, may be misaligned. Again, it's possible to just give them a thorough clean, however in some cases it might be necessary to have these replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognize that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional immediately.