UPVC Window Repairs

uPVC windows are energy efficient and aid in reducing heating costs. However, as they age, problems may arise that require fixing. This can include faulty hinges, handles, or locks.

DIY enthusiasts can repair wooden windows fairly easily. It is also cheaper than buying a new window.

Cracks

Cracks and tears in uPVC windows can be a major issue. If windows are not properly repaired, they can result in water intrusion and weaker barriers to cold weather, or even structural damage. Find a local builder who specializes in the repair of uPVC frames. They should have the required skills and experience, as well as the equipment needed to achieve the most effective results. This will ensure that your shattered window is fixed before it gets worse and you don't have to replace the window glass or RepairMyWindowsAndDoors window unit.

There are a variety of home remedies that can be used to repair small cracks in the glass. Masking tape and super glue are among the most popular products that can hold broken glass in place for a while. For deeper cracks, tape might need to be extended on both sides.

You can also make use of two-part epoxy for repairing damaged or cracked glasses. Hardware stores typically sell this product for about $10. Make sure your workspace is prepped before mixing the epoxy. Also, make sure you have the right tool for the job such as a soldering iron.

If you notice that your upper or lower sash is having difficulty lifting, it is likely because the cords connected to the sashweights are damaged. It's an easy fix that can be accomplished using an extension ladder and RepairMyWindowsAndDoors a flat-head screwdriver. Replacing a rotted drip cap is a different repair that can be completed at home. The majority of home centers have a drip caps that are not rot free and can be easily nailed or caulked in place. Verify that the glass in double or triple-paned window isn't damaged. The reason is because the gases that are trapped between the windows are responsible for RepairMyWindowsAndDoors increasing the energy efficiency of the window. They should not be allowed to escape.

Water Leaks

If your uPVC window is leaking, it could cause damage to your home and result in costly repairs. Water leaks can also weaken the structure of your house and cause mold growth. To prevent the damage, it's essential to repair any issues caused by leaky windows as soon as possible.

The most common cause of window leaks is the damage to the sealant around the frame. Using silicone caulking can help bring the condition of the seal back to normal and prevent water leakage. Look for gaps and cracks between the window frame and also the stone or brick wall that surrounds your windows.

A blocked drainage hole or an issue with flashing are also common causes of leaking windows. Make sure that the drainage holes have not been blocked or blocked, particularly after heavy rain. You should also check the windows' flashing to ensure that it's well-sealed.

It's also essential to ensure that your drip cap doesn't have any decay or is missing. A rotten or damaged drip cap can allow water to enter the window from above, causing damage to your home's structure. Replacing drip caps isn't difficult and usually a straightforward process of buying the new one and putting it in the right spot.

A professional can also check your windows for watertightness. They can employ a tool to determine the water-tightness of your windows and ensure that they meet industry standards. If your windows fail the test, they will need to be replaced. It's a costly repair but it's is worth it to ensure the safety and comfort of your family.

Sagging

If your windows don't shut properly, it could cause various issues, such as drafts condensation and a rise in energy costs. It can be an indication that the windows were not properly fitted at installation or the sealant is no longer working. Fortunately, there are some ways to fix the problem.

To repair your window correctly it is essential to create a space with plenty of natural light. Begin by laying out newspapers or an old blanket to shield the flooring from any splinters and drips that might fall off the windows while you work.

Use a white cloth that has been soaked in a mixture of detergent and water. This will ensure that you don't leave any stains of color on your windows. When you are ready to begin working on your uPVC windows, start by marking where the hinge channel should be situated. Then remove the channel from the frame and fill in the screw holes using epoxy (for uPVC windows) or wood filler (if your frames are constructed of wood). Make sure you scrape the hole you have filled before it sets.

Install the hinge channel after the holes are filled. Be sure to place it on the window jamb and then drill the new screw holes about a quarter inch away from the original locations.

Next, measure the spindle that protrudes from the underside of your handle. You can either order an alternative or bring it to a shop selling hardware to find a suitable replacement. Then, take out the setscrew on the operator shaft and smooth it so that the set screw can lock onto the shaft (photo). Now, your uPVC window should shut easily.

Broken Hinges

You will have difficulty opening or closing your uPVC windows when the hinges are damaged or not working properly. This can cause problems with security and prevent your home from staying warm or cool. It's simple to purchase a new hinge for your uPVC windows. It's crucial to choose the right type for your windows.

This is because the hinges have to be of the same width to fit in the window frame. The most popular hinge for windows made of uPVC are standard 18mm or UPVC 15mm hinges for windows. There are also special hinges for wooden frames. Choosing the correct window hinge for your windows will aid in avoiding common issues that homeowners have with their windows, such as not closing properly.

Your window hinges may be loose or stiff due to a variety of reasons. The most common reason is that the hinges are not tightened enough. To test this, take a screwdriver and locate the friction screw at the end of the hinge. Then loosen it. Then, you can adjust it by turning it either way.

If your UPVC window hinges aren't functioning as they should, you can contact Preston Glass Fix for a quick repair. Our technicians will evaluate the condition of your window hinges and recommend the best option for you. We can replace the window replacement hinges, re-tension them or install new locking mechanisms to ensure that your UPVC windows are secure and safe for years to come.

Locks that aren't working

UPVC window mechanisms and locks are an essential component of home security. They make it extremely difficult to open a window without breaking into the home. When a lock fails it could be frustrating, however it is a quick and easy repair and you don't need to replace the whole window.

Sometimes, the issue is a small issue that could have been avoided by regular maintenance. This is why we recommend having your uPVC windows maintained regularly using our yearly maintenance package to help reduce the likelihood of problems.

Modern uPVC windows come with espagnolette locks. They operate by putting the nose end of the handle on the wedge block, then turning it to close the lock. They are efficient in locking the window, but should they not be maintained in a timely manner, they may start to fail. We recommend lubricating them with WD-40 a few times a year.

If you find that your uPVC window isn't opening and closing as easily as it used to or if the lock doesn't function properly, there may be a problem with locking gearboxes inside the frame. Accessing this can be tricky as it requires the removing of seals around the frame as well as the removal of the handle (be cautious not to damage the seals).

A locksmith who specialises in UPVC repairs will have the expertise to quickly identify the issue and be able to replace the failed locking gearbox with an exact replacement. This simple and quick fix can save you hundreds by avoiding having to buy new windows.